All-Purpose Disinfectant Concentrate for surface and water disinfection

Sanosil S015 is a disinfectant concentrate for semi-professional and professional application.

Although preferably used for water and pipe disinfection, it can also be applied undiluted (usually 1:4 – 1:1) as a surface disinfectant.

In concentrated form, Sanosil S015 is also used to eradicate bacterial endospores.

Sanosil S015 is the product of choice for:

  • Production of disinfectant solutions
  • Eradication of bacterial endospores
  • Drinking water/eradication of legionella (see water disinfection)

Short info:

Suitability: – Surface disinfection, spray disinfection, aerosol disinfection, water disinfection

Product type: – Concentrated, ready to use

Effectiveness: – bacteria, viruses, yeasts and fungi, broad protozoa spectrum

Contact time: 1-15 min. / 1-60 min. depending on dilution

Packaging: 10kg, 25kg, 200kg, 1000kg

Shelf life: 2 years

Active ingredients: Hydrogen peroxide and silver

Working Principle

The active substance used is hydrogen peroxide. In a complex manufacturing procedure, the active substance is stabilized and boosted with silver, thus achieving a greatly improved effectiveness against micro-organisms. The traces of silver remaining on the treated surfaces are not visible. However, they efficiently inhibit a renewed contamination. The elemental oxygen (O2) separated by the hydrogen peroxide attacks the cell walls of the micro-organisms directly. The chemical reaction between the oxygen and the cell wall molecules will cause these to be denatured and destroyed. This effect is intensified by the silver ions which form a bond with the disulphide bridge of certain proteins of micro-organisms, thereby inactivating or precipitating these proteins.


The diluted solutions of Sanosil S015 are particularly well suited to the disinfection of contaminated surfaces. Soiled surfaces should be previously cleaned in order to ensure perfect disinfection. The better the cleaning procedure (for example with high pressure cleaner, brush and soap water) the more effective the subsequent disinfection.

Recommended dosage – overview

15% = to combat bacteria, viruses, yeasts and fungi (low-degree contamination, thoroughly cleaned)
20% = … (low-degree contamination, well cleaned)
40% = …. (high-degree contamination)
75% = to combat mould (mycelium), bacteria, yeasts and fungi (very high contamination)
80-100% = to combat bacterial endospores
6600 ml/m3 = Pipeline and tank disinfection (shock disinfection)
160 – 660 ml/m3 = water disinfection (cooling tower, air washers, irrigation systems, etc.)

Go to Drinking Water Treatment to learn more
Get Product Data Sheet on Sanosil S015
Request Safety Data Sheet on Sanosil S015


Use biocides safely. Always read the label and product information before use.

    Water Treatment Products is the only distributor for Sanosil® products in the UK

    Supported by over 200 independent tests.

Privacy Policy

Designed and built by Big Eye Deers